You have no items in your shopping cart.
BluEdge 2.4" Full-Colour RS485 LCD BMS Display
Quick and easy setup to display key battery information such as State of Charge (both % and Ah), Voltage, Current draw, Temperature, Cycles etc.
Suitable for compliance with AS/NZS 3001.2:2022 and AS/NZS 3004.2:2014 standards.
Built-in audible alarm that will trigger on adverse battery conditions prior to battery shut-down.
Conveniently view battery alarm codes.
View consolidated battery information for a bank / group of connected BluEdge batteries in one convenient display (for models that supports parallel communication). For the 24V, 36V and 48V batteries – dive down into cell voltage data for each connected battery in the group.
Easy fixing with flexible flush mounted design and range extendable via common UTP network cables. *** Please note, the display unit requires a compatible communications adapter cable to connect to a battery. Refer to the table below for the compatible cable for each battery model.
| Battery model | Protocol | Communication cable adapter required for display | Parallel communication supported? | 
| AT-LFP-12-100-BTC-BV10 | RS485 MODBUS RTU C JBD Amptron custom – SUP – (Parallel or Series) | AT-BE-CAN-RS485-COMM-BV01 | Yes, up to 4 batteries | 
| AT-LFP-12-200-BTC-BV10 | RS485 MODBUS RTU C JBD Amptron custom – SUP – (Parallel or Series) | AT-BE-CAN-RS485-COMM-BV01 | Yes, up to 4 batteries | 
| AT-LFP-12-200-BTC-DV10 | RS485 MODBUS RTU C JBD STD | AT-BE-CAN-RS485-COMM-AV01 | No | 
| AT-LFP-12-400-BTC-BV10 | RS485 MODBUS RTU C JBD Amptron custom – SUP – (Parallel or Series) | AT-BE-CAN-RS485-COMM-BV01 | Yes, up to 4 batteries | 
| AT-LFP-12-400-BTC-DV10 | RS485 MODBUS RTU C JBD STD | AT-BE-CAN-RS485-COMM-BV01 | No | 
| AT-LFP-24-100-BTC-BV10 | RS485 MODBUS RTU C JBD ESS | AT-BE-CAN-RS485-COMM-BV01 | Yes, up to 16 batteries | 
| AT-LFP-24-200-BTC-BV10 | RS485 MODBUS RTU C JBD ESS | AT-BE-CAN-RS485-COMM-BV01 | Yes, up to 16 batteries | 
| AT-LFP-36-100-BTC-AV10 | RS485 MODBUS RTU C JBD ESS | AT-BE-CAN-RS485-COMM-BV01 | Yes, up to 16 batteries | 
| AT-LFP-48-100-BTC-AV10 | RS485 MODBUS RTU C JBD ESS | AT-BE-CAN-RS485-COMM-BV01 | Yes, up to 16 batteries | 
| 
 Item 
 | 
 Specification 
 | 
 Description/Remark 
 | 
| 
 Model 
 | 
 AT-BMSMON-2.4-COL-RS485-AV01 
 | 
 BluEdge LCD 2.4-inch full-colour RS485 BMS display 
 | 
| Display | Full Colour LCD | 
 | 
| Preset capacity range | 0.1Ah to 999Ah | 
 | 
| 
 Interface Comms connection 
 | 
 RS485 
 | 
 Using a UTP CAT5 or CAT6 cable 
 | 
| 
 Weight 
 | 
 20g 
 | 
 | 
| 
 Size 
 | 
 100*70*15mm 
 | 
 | 
| 
 Protection Category 
 | 
 IP55 
 | 
 Not suitable for outdoor use 
 | 
    
  
        
        
        
        
        
        
        
        
      
        
        
        
      
        
        
        
      
        
        
        
      
        
        
        
      
        
        
        
      
        
        
        
      
        
        
        
      