TRED 140mm Long Extension Pin (Pair)

TRED Threaded Extension, 140mm The mounting pins may support four stacked TRED Pro, HD, or GT boards or four stacked TRED 1100 or 800 model boards.

NOTE: TRED Quick Release Mounting Pin Heads are incompatible with threaded pins.

Fits two to four original model (TRED 800 and 1100) recovery boards for mounting.

Because of the TRED 800 and 1100 Recovery Boards' larger stacking height, the TRED Threaded Long Extension Pins are made to install the boards to your car, trailer, or caravan quickly and firmly. By doing this, the range will be extended to 18-98mm, or 0.7"–3.86".

**NOTE** The TRED GT Quick Release ratchet handle is incompatible with this threaded pin.
The Tred Quick Release Ratchet Handle is available at https://tredoutdoors.com/products/.

Please have a look at the following mounting alternatives for TRED Pro, HD, and GT Recovery Board mounting solutions:
TRED GT

https://tredoutdoors.com/products/tred-mounting-baseplate-two-pins is the mounting baseplate.
https://tredoutdoors.com/products/tred-113mm-quick-release-mounting-pins-pair is the link to purchase TRED GT Quick Release Pins.
https://tredoutdoors.com/products/tred-115mm-threaded-mounting-pins-pair is the link to purchase TRED Threaded Mounting Pins.

Please take a look at the TRED GT Mounting Baseplate adapter kits for rack mounting hardware:
Visit TedOutdoors.com/products/Tred-mount-base-adapter-kit01 to purchase the Flat Mount Adapter Kit.
https://tredoutdoors.com/products/tred-mount-base-adapter-kit-side-mount Side Mount Adapter Kit

Included are:

Twisted 140mm/5.5" Mounting Pins two pieces*Some recovery board channel forms close to the mounting holes prevent the Securing Nut from fully receding into the channel, affecting the height range.

*A stack of four TRED800 models will not function with these pins, even though they enable the locking capability. with the Securing Nut** in conjunction.

**Securing nuts must be purchased separately and are not included.