Shalex Canvas Cote 1ltr Liquid Waterproofer

Shalex Canvas Cote is a waterborne waterproofing compound designed to penetrate into fabrics such as canvas and provide an impervious membrane to stop the ingress of shallow pooling water and wind driven rain, and to prolong the life of ageing canvas products.

Canvas Cote dries clear and remains highly flexible under extreme elongation and under constant exposure to moisture and/or hydrostatic pressure. Canvas Cote is suitable for more open weave fabrics and is able to plug needle punch holes and leaking seams, where silicone based sealers are ineffective.

Once applied Canvas Cote forms an acrylic membrane and will provide a barrier to water penetration for many years. Unlike silicone water repellents Canvas Cote does not require periodic treatment. Canvas cote may slightly stiffen thinner fabrics as it forms a flexible film.

PRODUCT FEATURES

  • Adds to the life of ageing canvas products

  • Effective on needle punch holes and leaky seams

  • Does not require periodic application

  • One component

  • Highly flexible, accomodates movement

  • Waterborne for easy application and clean up

  • Safe to use with minimal vapour

  • Dries to a clear, transparent finish

  • Permanently flexible, excellent resistance to embrittlement

  • Outstanding adhesion over a wide variety of substrates

  • May be painted over with any acrylic based paint (e.g. stencils)

APPLICATION INSTRUCTIONS

SURFACE PREPARATION:

• All surfaces should be clean, sound and free from dry or loose material. Check for presence of waxes, oils or other contaminants that may affect adhesion before application. 
• Tight weave materials such as canvas may require brushing to reduce surface tension and help Canvas Cote penetrate into the fabric. Brushing the fabric with a paint brush or stiff broom during application is often required to work Canvas Cote into the fabric.
• Moulds, lichen or fungal growth should be treated with a suitable algicide or if unavailable with a dilute bleach solution (1 part household bleach to 2 parts water) to kill any spores. Leave the bleach solution in contact with the surface for approx 10 minutes then liberally rinse with clean water and allow to completely dry.
  
  

APPLICATION METHOD:

Apply one or more coats with a brush, roller or pesticide type sprayer keeping the product in contact with the surface for as long as possible to maximise absorption. If using a spray, multiple light passes over an area are preferable to one heavy pass. Additional coats over problem areas like seams may be required to fully seal.