Elecbrakes Flat Plug 7 Pin Male 7 Pin Female
Elecbrakes is the electric brake controller revolutionising towing in Australia and New Zealand. Delivering unparalleled performance, safety and flexibility, this trailer-mounted solution is compatible with any tow vehicle.
Suitable for caravans, trailers, horse floats and boat trailers, our 10-minute Plug and Play setup eliminates the need to modify your tow vehicle. Complete with custom presets and a smooth proportional brake response, it's time for a seamless towing experience.
We’re excited to announce the release of EB2, the evolution of the original Elecbrakes ELBC2000-PS. EB2 carries forward all the capabilities you know and love from the previous model, and then some.
The integrated Deutsch allows EB2 to be mounted in tighter spaces.
EB2 has undergone independent testing by our IP agency and through extensive testing, achieved IP67 certification. The EB2 is waterproof, shockproof, and dustproof, making it a dependable choice for durability and optimal performance in all towing conditions.
We’ve made it even easier to connect your unit. EB2 uses tap technology (NFC) to download the app and connect the unit. You simply need to bring your phone close to the unit and follow the prompts on your phone!
EB2 is built to last. In addition to the IP67 certification, we have built into EB2 the intelligence to regulate itself with thermal protection and short circuit protection if extreme conditions are met.
EB2 will measure the power applied to the brakes and feed this information back to the user’s app. Elecbrakes can resolve any issues you might encounter. It uses live data and intelligent diagnosis capabilities to diagnose and assist troubleshooting.
EB2 will have improved firmware update capabilities allowing feature updates,
accessible through the Elecbrakes App via the user’s phone. Ensure your app is up to date to take advantage of the most recent updates.
Download on the App Store
Get it on Google Play
EB2 allows the user to have better management of their devices. Users can manage multiple devices on the app at one time. This means if you have a fleet or multiple trailers, you can add all devices to the app for easy management.
As we introduce EB2, we want to emphasize that what’s worked for you before still works. The foundational features you’ve relied on in our previous unit remain unchanged.
EB2 will still feature all the qualities that make Elecbrakes the most innovative brake controller on the market but we have continued to engineer the EB2 so it’s now the smartest and toughest brake controller out there.
Follow our steps https://www.youtube.com/watch?v=BE3I_RU-2UA and get your rig on the road in less than 10 minutes.
Simple “Plug + Play” installation means there’s no complicated wiring knowledge required.
Mounted to the trailer, not the tow vehicle, for ultimate flexibility.
Our electric brake controller can be mounted on any trailer and towed by any vehicle.
Set, store and select user-defined brake programs for different towing scenarios.
Elecbrakes has always been proudly Australian made, and will continue to be.
Elecbrakes makes it easy to install an electric brake controller. All you need is your electric brake controller kit, an electric drill, a 2-3mm drill bit, a No. 2 phillips head driver, marker pen and lubricant.
The Elecbrakes device can be mounted in various locations on the trailer. To ensure correct operation the unit MUST have one of its sides/edges parallel to the ground, and cannot be on an incline, regardless of where it is placed on the trailer. We recommend mounting the device on either the inside or outside of the trailer draw bar. Place the device close enough to the trailer plug for it to be connected to both the trailer and the tow vehicle.
The plug and play version of the Elecbrakes device has identical functionality to the hardwired version. The difference is that it comes with waterproof connectors and the adaptors are pre-wired. This takes away any requirement for the user to splice Elecbrakes into the trailer’s existing circuits.
To connect your device simply plug the trailer lead into the pre-wired adaptor and then plug the adaptor into the tow-vehicle’s trailer port.
There is also a trailer-wired option available, which allows the user to wire the device directly into the trailer’s loom. In that case the device would be configured as per the following electric brake controller wiring diagram.
After mounting your Elecbrakes device to your trailer draw bar, all you have to do is connect to the controller with the smartphone app and you’re good to go.
For the ultimate in on-the-go brake response adjustment, our customers love the Elecbrakes in-car remote control. Once you have connected your device simply power up your remote and it will automatically connect to your brake controller. It will display a tick on screen when connected.
When faced with a number of choices on the market, it’s understandable that many trailer users find themselves asking ‘which electric brake controller is best?’. We believe that the easy 10 minute Elecbrakes installation is just one more reason to join the towing revolution and get brake smart Elecbrakes — the ultimate in proportional brake control
