ENERDRIVE B-TEC 100AMP / 12V LIFEPO4 BATTERY GEN2

The Enerdrive Enerdrive B-TEC battery incorporates wireless Battery Monitoring Technology. By downloading the Android™ or Apple® app to your smartphone or tablet device, you can monitor the following information;

Battery Capacity
Battery Voltage
Battery Current (Amps)
Battery State of Charge (SOC)
Battery State of Health (SOH)
Battery Status
Individual Cell Voltage
Battery Temperature
Battery Cycles
Battery Alarms
Battery Event Information

Battery Management System

The battery is also equipped with an internal Battery Management System that can monitor and optimise each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS helps to ensure safe and accurate operation of the battery.

ALL Enerdrive products and systems now come with a 5 year warranty and lifetime tech support. Enerdrive holds a proven track record for near perfect resolve, so end-users can rest assured they are in good hands. The Enerdrive eLITE battery provides 60% more usable power than its equivalent lead acid cousin and being nearly 50% lighter and 30% smaller makes for a superior alternative.

Features

• All the same quality prismatic cells as found in Enerdrive B-TEC range

• Metal Battery Tray and hold down strap for quick and simple installation

• 100Amp Battery Monitoring System allowing up to 1000w Max Inverter Load

• Raised Terminals for 360 degree cable connections

• Up to 5 Year Warranty with 3 Year Full Replacement for Peace of Mind

Specifications

Normal Specification	EPL-100-12VLITE
Nominal Voltage	12.8V
Nominal Capacity	100Ah
Cycle Life (DOD – 80% under controlled conditions)	≥ 2000 Cycles
Standard Charge Specification (Lithium profile charger required)
Battery Charge Temperature	0 ̴ 45°C
Normal Charge Voltage CV/CC*	14.20 ̴ 14.60V
Standby (Float) Voltage	13.50 ̴ 13.60V
Maximum Charge Current	80A @ 25°C for 30mins
Recommended Charge Current for Maximum Life	≤33A
Standard Discharge Specification
Battery Discharge Temperature	-20 ̴ 60°C
Battery Output Voltage Range	11.00 ̴ 14.60V
Maximum Discharge Current	100A @ 25°C ± 5°C for 30mins
Pulse Discharge Current	450A for 1.0s
Discharge Cut-off Voltage	≤11.20V
Circuit Protection	The battery is supplied with a LiFePO4 Battery Management System BMS that can monitor and optimize each single prismatic cell during charge & discharge, to protect the battery pack from overcharge, over discharge & short circuit. Overall, the BMS helps to ensure safe and accurate operation of the battery.
Over-Charge Protection
Over-charge Protection Per Cell	3.90V ± 0.03V
Over-charge Release Per Cell	3.60V ± 0.05V
Over-charge Release Method	Discharge below release voltage
Over-Discharge Protection
Over-discharge Protection Per Cell	2.50V ± 0.05V
Over-discharge Release Per Cell	3.20V ± 0.05V
Over-discharge Release Method	Apply Charge/Voltage ≥12.8V
Battery Manual Reset Button	No
Over Current Protection
Discharge Over Current	110A for 30s – 450A for 1s
Protection Reset Time	5s Auto Release
Over Current Release Method	Disconnect Load
Over Temperature Protection
Battery Discharge Over Temperature	Protection to 65°C ± 5°C
	Release at 50°C ± 5°C
Battery Charge Over Temperature	Protection to 55°C ± 5°C
	Release at 45°C ± 5°C
Short Circuit Protection	Auto release after 5s
Mechanical Characteristics
Dimensions	Length 310mm
	Width 170mm
	Height 225mm
Weight	Approx 12kg
Storage Information
Temperature & Humidity Range	≤ 30 days -20°C ̴ 35°C, 45 ̴ 75% RH
	≥ 30 days -10°C ̴ 30°C, 45 ̴ 75% RH
Self-discharge Rate	≤ 3% Per Month

Warranty:

Please Note; The eLITE battery is capable to be paralleled to a second eLITE battery of the same size. For maximum performance and lifespan of your eLITE battery, no more than 2 batteries should be connected together to increase your overall capacity. Overall loads when paralleled should not exceed the current limits of a single batteries BMS.

The 100Ah battery is able to accept a maximum inverter capacity of 1000W only. Exceeding the maximum inverter capacity can damage the BMS Management within the battery.

If you are requiring a battery system larger than eLITE, please look at the ePOWER B-TEC battery range or the Enerdrive Pro Series Power Pack Systems of which can offer multiple parallel and series connections with Active Cell Balancing Protection across the entire pack.

ENERDRIVE B-TEC 100AMP / 12V LIFEPO4 BATTERY GEN2 Tray & Strap