Enerdrive B-TEC 12V 125ah G2 Battery + DC-DC 40A & AC 20A Charger
Bundle contains the following items:
- ePOWER B-TEC 12v 125Ah Lithium Battery Gen2
- ePOWER 12v DC2DC40+ DC-DC Battery Charger
- ePower 12V 20A AC Battery Charger EN31220
The latest G2 model B-TECH 125ah 12V Lithium Battery from Enerdrive now features an industry leading 5 year warranty and sees further design & functionality improvements and a handy purpose built battery tray & strap included with each battery
Smart Phone Monitoring System
The Bluetooth Wireless Battery Monitoring feature carries over to the whole B-TECH G2 Range, so you can monitor the following via your smartphone or tablet (Android & Apple Compatible)
- Battery Voltage
- Battery Current (Amps
- Battery State of Charge (SOC)
- Battery State of Health (SOH)
- Battery Status
- Individual Cell Voltage
- Battery Temperature
- Battery Cycles
- Battery Alarms
- Battery Event Information
Built-In Reset Button
A KEY improvement and a brand NEW features for the Enerdrive B-Tech G2 LIthium Battery range is the “Built-In Reset Button” making re-starting a flat battery a breeze. No longer do you need to apply a voltage to the battery terminals to wake up the battery. Press the button and within seconds, the battery will come back to life ready to accept a charge source to rejuvenate the battery.
Battery Management System
The other battery specifications remain relatively the same; battery weight, battery dimensions, max charge & discharge rates. The Prismatic Cell Design & Battery Management System (BMS) with Active Cell Balancing appears equal to the previous version. For those that don't know, the internal Battery Management System ensures safe and accurate operation of the battery. It monitors and optimises each Prismatic cell within the battery during normal operation. It will also protect the battery pack from over charge, over discharge, over temperature & short circuit.
Industry Leading Warranty
5 Year Product Warranty & Lifetime Technical Support . They also promote a track record of near perfect resolve - Purchase any Enerdrive Product with peace of mind your covered by a company at the forefront of lithium battery systems in Australia.
EPL-125BT-12V G2 Specifications:
- Amp Hours: (Ah) 125.0
- Dimensions: 318mm (L) x 165mm (W) x 232mm (H)
- Weight 15kg
- Battery Voltage: 12V
- Nominal Voltage: 12.8V
- Nominal Capacity: 125Ah
- Cycle Life: (DOD - 80% under controlled conditions) ≥ 2000 Cycles
- Battery Charge Temperature: 0 - 45°C
- Normal Charge Voltage: CV/CC* 14.20 - 14.60V
- Standby (Float) Voltage: 13.50 - 13.80V
- Maximum Charge Current: 60A @ 25°C for 30mins
- Recommended Charge Current for Maximum Life: ≤ 20-60A
- Battery Discharge Temperature: -20 ̴ 60°C
- Battery Output Voltage Range: 11.00 - 14.60V
- Maximum Discharge Current: 100A @ 25°C ± 5°C for 30mins
- Pulse Discharge Current: 450A for 1.0s
- Discharge Cut-off Voltage: ≤11.20V
- Battery Manual Reset Button: Yes
- Discharge Over Current: 110A for 30s – 450A for 1s
- Protection Reset Time: Approx 10s Auto Release
- Over Current Release Method: Disconnect Load
- Battery Discharge Over Temp: Protection to 65°C ± 5°C Release at 50°C ± 5°C
- Battery Charge Over Temp: Protection to 55°C ± 5°C Release at 45°C ± 5°C
- Short Circuit Protection: Auto release after 5s
- Self Discharge: ≤ 3% Per Month
Enerdrive 12v DC2DC40+ DC-DC Battery Charger / MPPT Solar Regulator
The Enerdrive ePOWER DC2DC+ Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. With two inputs available, the main/house battery will be charged from either the engine while underway, or via the solar panels when stationary. The process to choose either engine or solar is fully automatic and both functions are controlled from within the unit itself without the need for external relays. Profiles to charge GEL, AGM, Flooded, Lithium and even full custom profiles are included
Features
- Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
- DC M6 screw terminals that will allow for large battery cable connection between all sources
- A dedicated Maximum Power Point (MPPT) solar regulator
- The same battery algorithms as included in our AC mains ePOWER battery charger.
- GEL, AGM, Flooded, Lithium and the ability to create a full custom profile
- Vehicle input allows for either 12 or 24v and a maximum solar input of 45V/800W
- 40A output up to 40+°C with thermo controlled fan cooling
- Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
- Temperature sensor included in charger for more accurate battery charging
EN3DC40+ Specifications
- Output Voltage: 12V Nominal (8.0V min)
- Output Current: (Maximum) 40A ~ 50A
- Output Power: 775W
- Selectable Battery Type: Gel, AGM, Flooded, Lithium, Program
- Charger Voltage Range: 13.8V – 15.5V
- Float Voltage Range: 13.0V – 13.8V
- Charger Current: (User Selectable) 5/10/15/20/25/30/35/40/45/50A (default 40A)
- Equalise Voltage: (Flooded Battery) 15.5V
- Equalise Charging Current: 10% of Bulk Current Setting
- Charging Control: 2 stage / 3 stage selectable (Default 3 stage)
- DC Output Bank: Single (non isolated)
- Current draw from CH1 when not in use: < 50mA
- Battery Temperature Setting: Low/ Normal/ High (Battery Temperature Sensor Standard)
- Efficiency: 95%
- INPUT Rating: (CH2 – MPPT Solar)
- Input Voltage: 14.5 – 45VOC
- Maximum Input: ≤ 23V input, 500W (600W allowable) ≥37.5V-45V input, 750W (800W allowable)
- INPUT Rating: (CH3 – Start/Alternator)
- Input Voltage: 10.5 – 16VDC / 21 – 32VDC
- Dimensions: 242mm (L) x 172mm (W) x 74mm (H)
- Unit Weight 1.85 Kg
Enerdrive ePower 20amp 12v Battery Charger EN31220
The Enerdrive ePOWER 12V 20A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently. The ePower 20 amp, 12 volt smart battery charger with display and the ability to charge 3 separate battery banks. Suitable for caravans, camper trailer, motorhomes and boats. Profiles to charge GEL, AGM, Flooded, Lithium and even full custom profiles are included.
Future Proof LIthium Battery Charging - Built In
Lithium batteries require a constant current / constant voltage charge algorithm. The Enerdrive ePOWER charger has a class leading Profile for charging all types of Lithium batteries to their full potential. This setting delivers the full rated output of the charger constantly with the charger switching to power supply mode once the voltage peak is met (indicating a full battery bank). Also feature fully customisable charge rate and end voltage settings;
Select Charger Voltage Constant: 13.9, 14.0, 14.1, 14.2, 14.3, 14.4, 14.5, 14.6 Volts
Select Charger Current: 5A, 10A, 15A, 20A - So you can charge different size batteries or battery banks
Features
- Charge GEL, AGM, Flooded, Lithium with specific charge profiles inbuilt
- Multistage Charging: Fully automatic multistage 20A battery charger with the ability to charge 3 separate battery banks.
- Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three.
- Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.
- Current Control: User adjustable current output (e.g. Dial the 20amp unit back to run off a 1kVA generator).
- Smart Charging: The ePOWER 20A battery charger will regulate its output based on the loads connected to your battery banks.
- Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz.
- LED Display: Easy to use “set and select” menu along with scrolling charger status.
- Silent Mode: Disables the cooling fan for total silent operation at night or whenever required & reduces charge output by half and locks out fan for 12 hours.
- Temperature Sensor: Battery temperature sensor included with 3 meter cable.
- 5 Year Warranty from an Australian company renowned for customer support.
Specifications
- Model: EN31220
- Output Current: 20A
- Charge: 14.2 - 15.5 V
- Float: 13.4 - 13.8 V
- Charging Control: Four Stages (Bulk/Absorption/Float/Maintenance)
- Battery Compatibility: GEL, AGM, FLOODED, LITHIUM
- Dimensions: 295mm (L) x 206mm (W) x 86mm (H)
- Weight: 2.4kg