Enerdrive 12V 200Ah G2 Lithium Battery + ePower 40A AC & DC2DC Charger

Enerdrive B-TECH 12V 200Ah GEN 2 Lithium Battery + ePOWER 40A AC & DC2DC Charger

Enerdrive B-TECH 12V 200Ah GEN 2 Lithium Battery + ePOWER 40A AC & DC2DC Charger

Regular Price $3,233.50 Special Price $2,933.50

Enerdrive B-Tech 12V 200Ah Lithium Battery G2 + ePower 40A AC & DC2DC Charger

Availability: In stock

Enerdrive 12V 200Ah Lithium Battery G2 + 40A AC & DC2DC Charger

Pack includes:

  • Enerdrive ePOWER B-TEC 12V 200Ah Lithium Battery (G2)
  • Enerdrive ePOWER EN3DC40+ 12V 40A DC to DC Battery Charger
  • Enerdrive ePOWER EN31240 12V 40A AC to DC Battery Charger
This Enerdrive 12V 200A Lithium battery is the latest Generation 2 Model with improvements to design & functionality. Enerdrive B-TECH Lithium LiFePO4 Batteries offer Drop In Battery Replacement for AGM, GEL and other Lead based battery installations. Designed & Intended for use in deep cycle battery applications where a single battery meets the amp hour capacity required.

NEW Gen2 Features

  • BMS restart button for easy recovery of battery shutdown
  • RS485 communications port for advanced system integration
  • Raised terminals for 360 degree cable connections
  • Re-designed battery case for easy serviceability
  • Battery box and straps included
  • Available capacity: 200Ah
  • Max discharge rate: 200 amps for 30mins
  • Pulse Discharge Current: 450 amps for 1.0s
  • Charge rate: 40-100 Amps (max 150 Amps for 30mins)

Battery Management System

Equipped with an Internal Battery Management System (BMS) which can monitor and optimize each Prismatic cell within the battery during normal operation. It will protect the battery pack from over charge, over discharge, over temperature & short circuit. The BMS also ensure safe and accurate operation of the battery.

Enerdrive Smart Phone Monitoring System

The Enerdrive ePOWER B-TEC battery incorporates Wireless Battery Monitoring Technology. By downloading the app to your smartphone or tablet device, you can monitor the following information:

  • Battery Capacity
  • Battery Voltage
  • Battery Current (Amps)
  • Battery State of Charge (SOC)
  • Battery State of Health (SOH)
  • Battery Status
  • Individual Cell Voltage
  • Battery Temperature
  • Battery Cycles
  • Battery Alarms
  • Battery Event Information

Industry Leading Warranty

5 Year Product Warranty & Lifetime Technical Support . They also promote a track record of near perfect resolve - Purchase any Enerdrive Product with peace of mind your covered by a company at the forefront of lithium battery systems in Australia.

Enerdrive ePower 40amp 12v Battery Charger

The Enerdrive ePOWER 40A Battery Charger is a fully automatic, “set and forget” charger. It is designed to quickly and accurately recharge your batteries using algorithms that help maximise service life. Multistage smart charging technology enables the charger to be connected to your battery banks permanently. The ePower 40 amp, 12 volt smart battery charger with display and the ability to charge 3 separate battery banks.Suitable for caravans, camper trailer, motorhomes and boats.

EN3124 Features

  • Multistage Charging: Fully automatic multistage 40A battery charger with the ability to charge 3 separate battery banks.
  • Separate Battery Banks: Isolated charging design where battery bank one is separate from battery bank two and three.
  • Programmable: Battery bank 1 can be programmed with a different charge algorithm over banks 2 and 3.
  • Current Control: User adjustable current output (e.g. Dial the 40amp unit back to run off a 1kVA generator).
  • Smart Charging: The ePOWER 40A battery charger will regulate its output based on the loads connected to your battery banks.
  • Wide AC Input Range: Operates on both 110V / 60Hz and 240V / 50Hz.
  • LED Display: Easy to use “set and select” menu along with scrolling charger status.
  • Silent Mode: Disables the cooling fan for total silent operation at night or whenever required. Activation reduces charge output by half and locks out fan for 12 hours.
  • Temperature Sensor: Battery temperature sensor included with 3 meter cable.
  • 5 Year Warranty from an Australian company renowned for customer support.


Enerdrive 12v DC2DC40+ DC-DC Battery Charger / MPPT Solar Regulator

The Enerdrive ePOWER DC2DC+ Battery Charger is a fully automatic multistage, multi input battery charger with the ability to charge from either an alternator linked to a battery; or via solar power with the in built Maximum Power Point Tracking (MPPT) Solar Controller. With two inputs available, the main/house battery will be charged from either the engine while underway, or via the solar panels when stationary. The process to choose either engine or solar is fully automatic and both functions are controlled from within the unit itself without the need for external relays. Profiles to charge GEL, AGM, Flooded, Lithium and even full custom profiles are included


  • Two totally independent DC Inputs for both engine and solar regulation charging one house battery bank output
  • DC M6 screw terminals that will allow for large battery cable connection between all sources
  • A dedicated Maximum Power Point (MPPT) solar regulator
  • The same battery algorithms as included in our AC mains ePOWER battery charger.
  • GEL, AGM, Flooded, Lithium and the ability to create a full custom profile
  • Vehicle input allows for either 12 or 24v and a maximum solar input of 45V/800W
  • 40A output up to 40+°C with thermo controlled fan cooling
  • Fully programmable LCD display to show which source is charging the battery along with charger status, voltage and amperage
  • Temperature sensor included in charger for more accurate battery charging


EN3DC40+ Specifications

  • Output Voltage: 12V Nominal (8.0V min)
  • Output Current: (Maximum) 40A ~ 50A
  • Output Power:  775W
  • Selectable Battery Type: Gel, AGM, Flooded, Lithium, Program
  • Charger Voltage Range:  13.8V – 15.5V
  • Float Voltage Range:  13.0V – 13.8V
  • Charger Current:  (User Selectable) 5/10/15/20/25/30/35/40/45/50A (default 40A)
  • Equalise Voltage:  (Flooded Battery) 15.5V
  • Equalise Charging Current:  10% of Bulk Current Setting
  • Charging Control:  2 stage / 3 stage selectable (Default 3 stage)
  • DC Output Bank:  Single (non isolated)
  • Current draw from CH1 when not in use:  < 50mA
  • Battery Temperature Setting:  Low/ Normal/ High (Battery Temperature Sensor Standard)
  • Efficiency:  95%
  • INPUT Rating:  (CH2 – MPPT Solar)
  • Input Voltage:  14.5 – 45VOC
  • Maximum Input: ≤ 23V input, 500W (600W allowable) ≥37.5V-45V input, 750W (800W allowable)
  • INPUT Rating:  (CH3 – Start/Alternator)
  • Input Voltage:  10.5 – 16VDC / 21 – 32VDC
  • Dimensions: 242mm (L) x 172mm (W) x 74mm (H)
  • Unit Weight 1.85 Kg
Write Your Own Review
You're reviewing:Enerdrive B-TECH 12V 200Ah GEN 2 Lithium Battery + ePOWER 40A AC & DC2DC Charger