Baintech 12V 110Ah Slimline Lithium Battery Built in 20A DC-DC Charger

Baintech 12V 110Ah Slimline Lithium Battery with built-in DC-DC charger.

NEW Generation DSC features - Ignition Trigger Input, 2 rotary switches -  Voltage  & Delay Switch


Availability: Out of stock

Regular Price: $1,649.00

Special Price: $1,499.00

Bainbridge Technologies
We accept PayPal


12 months interest free with humm90
Shipping Cost Calculator


Enter destination to get a shipping cost

Shipping Rates

Product Description


BAINTECH 12V 110Ah Slimline Lithium (LiFePO4) Battery with Built-in 20A DC2DC Battery Charger

Shipping with 2021 New Generation DCS  - Ignition Trigger Input, 2 rotary switches -  Voltage  & Delay Switch

At just 11kg, the unique slimline shape makes it the perfect battery for installations where space is a premium. Slide it behind a seat, under a false floor, or in a rear wing. Measuring just 635mm x 260mm x 50mm


  • Internal 20A DC DC Charger & VCR
  • Internal 100A BMS
  • Aluminium powder coated enclosure
  • 1 x grey Anderson connector (In/Out)
  • 1 x blue Anderson connector (DC In)
  • Lightweight at just 14kg
  • Connect in parallel: more capacity & power
  • Designed and fully assembled in Australia

The BTLITH12110-SL-DCS model contains one (1) grey Anderson plug connector and one (1) blue Anderson plug connector, accessible from the side of the battery as shown in Figure 4. The grey connector can used as input and output for charging and running loads. 

NOTE – There are no internal fuses inside the battery so an external fuse must be used for the grey Anderson connector, 100A maximum, to ensure never to exceed the BMS 100A continuous charge and discharge rating. The cable to the blue Anderson connector should be protected by an external fuse (at least 20A, rated for the cable size), as close as possible to the vehicle battery/alternator. 

Charge sources to the grey Anderson connector could include:

- External AC charger; or
- External (regulated) solar charger.

The blue connector is reserved for a DC input, to make use of the internal DC-DC charger. The DC-DC charger is rated for 20A input from a vehicle alternator or start battery.



  • Capacity 110Ah
  • Nominal Voltage 12.8V
  • Type LiFePO4
  • Charge Voltage 14.6V max
  • Charge Current 100A max continuous
  • Discharge Current 100A continuous
  • Discharge Current 200A peak
  • Operating Temp 0-45C
  • Weight 11kg
  • Life at 80% DoD 2,000 cycles
  • Life at 50% DoD 5,000 cycles
  • Size (LxDxH) 635 x 260 x 50mm

IMPORTANT - Incase we don't have stocked item in our warehouse, we can also arrange a direct shipment from our supplier to you.


Write Your Own Review

You're reviewing: Baintech 12V 110Ah Slimline Lithium Battery Built in 20A DC-DC Charger

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.