New

Satking VAST Satellite Receiver Decoder DVBS2-800CA Set Top Box PVR

This great new VAST satellite decoder is perfect for use at home, for those on the move or anywhere requiring remote area television reception. Capable of both 12V and 240 Volt operation, this is perfect for those in caravans or motor homes needing a satellite system capable of running on batteries.

SKU: DVBS2-800CA

Availability: In stock

Regular Price: $269.00

Special Price: $260.00

Product Description

Details

Satking DVBS2-800CA VAST HD Satellite receiver + Vast Smart Card (Access fee is included in the price of this satellite receiver. No ongoing fees apply.) All you need to do is register the smart card number once purchase

, Leading Vast receiver in Australia 

•  Compact design makes it ideal for travelling 
•  Power consumption below 15 watts
•  HDMI composite & component video outputs
•  USB socket for PVR recording
•  Easy to read 8 day Electronic Program Guide (EPG)
•  Large buttoned remote control with learning function
•  Internal Satellite signal finder with an intensity beeper
•  Electronic map with coordinates for easier dish positioning
•  On board electronic help guide
   HDMI composite & component video outputs
•  Built in RF modulator for older TV's running aerial connection

Satking DVBS2-800CA VAST HD Satellite receiver + Vast Smart Card (Access fee is included in the price of this satellite receiver. No ongoing fees apply.) All you need to do is register the smart card number once purchased.

Dimensions: 220 mm (W) x 180 mm (D) x 47 mm (H)  Weight: 750 grams

 Whats Vast TV? Free to air digital television and radio channels via Satellite for those living in remote areas or who are unable to receive digital TV through their normal antenna because of issues relating to local interference, terrain or distance from the transmitter in their area. The VAST decoder can be registered as a permanent or traveller registration. A permanent registration is for households with a fixed installation of the decoder. A traveller registration covers people who as part of their travelling are in areas of Australia not covered by normal terrestrial television. Access to  available channels is based on which state your box is registered to.

The unit can be used for either VAST traveller customers (12 Volt) or VAST at home customers (240 Volt) via the included power pack. For self installation SatKing has developed an internal signal finder with an intensity beeper to assist with installations the higher the signal the faster the beeping and an electronic map built in to give you your coordinates for easier dish positioning. The unit also has a detailed electronic help guide and handy features like a USB speed test to test your USB device. For the VAST traveller caravan market the unit also has an optional IR target so you can place the VAST decoder in a cupboard and hide the unit out of sight also handy two place the unit behind large screen TV’s in home when you don’t want to look at the STB. Commercial installations and customers with older TV’s will find the built in RF modulator of great assistance, you can simply use the SatKing decoder on any TV new or old without any extra expense.

Features:

 Australian VAST certified

 High definition MPEG-4

 12/240 Volt operation for home or RV use

 Compact size 220 mm x 180 mm x 47 mm

 Friendly bright coloured menu

 Signal finder with beeper

 USB PVR ready as standard (compatible with most drives and memory sticks)

 Large button remote with learning functions

 Fast operating 8 day EPG

 Infrared target (optional)

 Parental control

 Time shift function via PVR

 Program auto tune with reminder

 HDMI output

 Component output

 CVBS output

 RF modulator

 Digital audio (Coaxial & S/PDIF)

 Dolby digital audio

 LNB loop out (for connection to another decoder)

 USB-2.0

 USB speed test

 DiSEqC 1.0/1.2 supported

 Adjustable LNB settings

 Low power consumption (less than 15 W)

 Over the air software download supported

 Subtitles supported

 IRDETO secure silicon inside


Technical Specifications:

 CPU: STi7111

 Processor: Speed 450 MHz

 Flash memory: 16 MB (NOR) + 128 MB (NAND)

 DDR: 256 MB

 EEPROM: 32 kB

 Input Frequency: 950 ~ 2150 MHz

 Loop out frequency: 950 ~ 2150 MHz

 Signal level: -25 dBvM ~ -65 dBvM

 Impedance: 75Ω

 Symbol rate DVBS: 2 ~ 45000

 Symbol rate DVBS-2: 2 ~ 45000

 Standard: DVB-S (EN300 421) DVB-S2 (EN302 307)

 Demodulation: QPSK, 8PSK

 DiSEqC: 1.0, 1.2 USALS compatible

 22 kHz Tone: 22 kHZ + 2 kHz

 LNB Power: 13V/18V 500mA Max

 FFC Mode: QPSK: 1/2, 2/3, 3/4, 5/6, 7/8        8PSK: 1/2, 2/3, 3/4, 3/5, 4/5, 5/6, 8/9

 Reed Soloman: 204, 188, t = 8

 Standard: ISO/IEC 13818-1

 Input max: 120 Mbps (Serial) and 15 Mbps (Parallel)

 Standard: ISO/IEC 13818-2, MPEG-2 MP@HL, MPEG-4 AVC/H.264 MP@L4.1, HP@L4.1

 Aspect: 4.3, 16:9

 Video resolution: 1080i, 720p, 576p, 576i

 Standard: ISO/IEC 13818-3

 Decoding: MPEG-1 and MPEG-2 Layer I and II, Dolby AC3, MPEG-4 HE-AAC+

 Output mode: Mono, Dual-Channel, Stereo

 Sampling frequency: 32, 44.1, 48 kHz

 Audio output Ω: Low

 IRDETO: Secure silicon

 Smart card reader: ISO 7816

 Channel range: 21 ~ 69 UHF

 Voltage range: 10 ~ 16 VDC

 Power consumption: <15 Watt

 Dimensions: 220 mm (W) x 180 mm (D) x 47 mm (H)

 Weight: 750 grams

 Operation temperature: 0 ~ 40 °C

 Satellite in: F-Type Female

 Satellite Loop out: F-Type Female

 CVBS: 1 x Video, 1 x L + R

 HDMI: 1 x 1.4a

 Component: 1 x YPbPr

 RF Modulator: 1 x PAL Male, 1 x PAL Female

 Digital audio: 1 x S/PDIF, 1 x Coaxial

 USB: 1 x USB 2.0

 Ethernet: 1 x RJ-45

 Serial port: 1 x RS-232 (9 Pin Din)

 Infrared sensor: 1 x 3.5 mm jack (sensor optional)

 Power: 1 x 2.1 mm Jack

 AV Cable: 3 RCA to 3 RCA Video and Audio

 240 Volt power pack: 1 x 12 Volt 2AMP pack AC 100 ~ 240 Volt 50/60 Hz

 RCU: Remote with learning function

 Batteries: 2 x AA

 User manual: A5

 

 

 

 

Reviews

Write Your Own Review

You're reviewing: Satking VAST Satellite Receiver Decoder DVBS2-800CA Set Top Box PVR

Product Tags

Product Tags

Other people marked this product with these tags:

Use spaces to separate tags. Use single quotes (') for phrases.